INDUSTRIAL PRODUCTS · FULL CATALOG
Every series, model and specification from the Guangzhou Zirun catalog, online. Prefer a file? Download the catalog in five languages. For samples and quotations: gosanya@gmail.com.
Zirun New Material Technology Co., Ltd. (Guangzhou) is an R&D company specializing in surface modification technology and new materials, with decades of technical accumulation in dry film lubricants, high-temperature anti-seize compounds, fluorinated lubricating greases and anti-rust lubrication. Its product technology has provided technical support and joint research on lubrication and surface modification (dry film lubrication) to Mitsubishi, Panasonic and Honda in Japan, and to Gree Electric and Meizhi in China. Its technology serves the air-conditioning, bearing, high-speed rail, metro, automotive, semiconductor manufacturing and forging industries. Business scope: R&D of new material technology; research and application of energy-saving and environmental protection technology; biotechnology and new energy technology development; development and application of green industrial manufacturing technology.
Product properties include: lubricity, wear resistance, running-in performance, noise reduction, heat dissipation, hydrophilicity, rust prevention, surface modification, oleophilicity, solvent resistance, light shielding, oil resistance, electrical conductivity, anti-adhesion and electrical insulation.
1. Dry Film Lubricants (water-based and solvent-based)
2. Fluorine Lubricant Series
3. Assembly & Anti-Seize Pastes
4. Lubricating Grease for Gas Rotary Valves
5. Anti-Rust Lubrication Series
6. Cold Galvanizing Coatings
7. Specialty Spray Series
A dry film lubricant is a functional coating made of solid lubricants such as molybdenum disulfide, graphite and PTFE, combined with special binders and dispersed in an organic solvent or water. After drying at room temperature or curing by heating, it forms a dry lubricating film. Commonly used solid lubricants include molybdenum disulfide (MoS2), graphite, polytetrafluoroethylene (PTFE) and boron nitride (BN).
| Solid lubricant | MoS2 | Graphite | PTFE | Boron nitride |
|---|---|---|---|---|
| Appearance | Gray-silver | Black | White | White |
| Density | 4.8 | 2.2 | 2.2 | 2.3 |
| Friction coefficient | 0.04 | 0.06 | 0.04 | 0.06 |
| Load capacity | 784 MPa | 490 MPa | 196 MPa | 490 MPa |
| Heat resistance | Oxidation starts at 350 C (1,350 C in vacuum, forming MoO3) | Oxidative decomposition at 550 C (forming CO2) | Oxidative decomposition at 300 C | Oxidation starts at 900 C (forming B2O3) |
Substrate: metal, plastic, rubber, etc.
1. Part selection — choose a dry film lubricant whose curing temperature does not affect the substrate properties.
2. Degreasing — remove oil and grease from the part surface to ensure coating adhesion and stability.
3. Surface pretreatment — pretreat the surface (phosphating, sandblasting, etc.) to increase adhesion.
4. Cleaning and drying — clean and dry the pretreated parts.
5. Preheating — for low-volatility dry film lubricants, preheat and rotate the parts before coating, referencing the solvent boiling point, to achieve a uniform film without dripping.
6. Coating — spraying, brushing or dip coating; rotate parts when needed for a uniform film.
7. Curing — room-temperature curing (standing after coating) or heat curing (heating to harden the film), selected according to the coating type.
8. Inspection — check film thickness, hardness, adhesion, lubricity, color and gloss.
Low friction coefficient, wear resistance, heat resistance, acid and alkali resistance, oil resistance and solvent resistance.
Ratings legend: ◎ excellent; ○ good; △ fair; – not applicable. Rating order: Load / Wear / Corrosion / Metal / Rubber / Plastic / Stamping / Running-in / Long-term lubrication / High temperature.
| Series | Solid lubricant | Typical models (suffix E = fast-drying type) | Color | Film | Thickness | Ratings | Solvent-based counterpart |
|---|---|---|---|---|---|---|---|
| WHM1 | – | WHM1-12 / WHM1-12E | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | HM1 |
| WHM2 | MoS2 | WHM2-12 / WHM2-12E (low-friction thin-film type) | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | HM2 |
| WHM3 | Graphite | WHM3-12 / WHM3-12E (even lower friction type) | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | HM3 |
| WG8 | – | WG8-12 / WG8-12E (special purpose) | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | G8 |
| WMPC | PTFE / MoS2 / graphite | WMPC12 / WMPC12-E | – | Hard film | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | MPC |
| WPC | PTFE / graphite | WPC12 / WPC12-E | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | PC |
| WP / WTP / WZP | PTFE | WP12 / WTP12 / WZP12 | White / gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | P / TP / ZP |
| WCP | Graphite / PTFE | WCP12 / WCP12-E | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | CP |
| WBM67 | MoS2 | WBM6701 / WBM6705 / WBM6710 | Gray-black | – | 1–30 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | MB5 / M56 |
| WBM68 | MoS2 / graphite | WBM6801 / WBM6803 / WBM6805 / WBM6810 | Gray-black | Soft / hard film | 1–30 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | M5 / M6 / BM5 |
| WBM69 | PTFE / MoS2 / graphite | WBM6901 / WBM6905 | Gray-black | – | 1–30 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | MB5 / M56 |
| WM80 | – | WM80 (under development) | – | – | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | M80 |
| WM88 | MoS2 / graphite | WM88 (under development) | Gray-black | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | M88 |
| WM81 | – | WM81 (under development) | – | – | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | M81 |
| WM66 | MoS2 / graphite; graphite / PTFE | WM66; W61C (for rubber, incl. curing agent); W6130 (for plastics and rubber) | Gray-black | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ (varies by model) | MB5 / M56 / M55 |
| W61 | PTFE / graphite | W6120 (for plastics and rubber) | – | Medium-hard film | 1–10 µm | ○ / ◎ / – / ○ / ◎ / ○ / ◎ / ◎ / ○ | MT67 / B |
| W61 | PTFE | W6110 (for plastics and rubber) | White | – | 1–10 µm | ○ / ◎ / – / ○ / ◎ / ○ / ◎ / ◎ / ○ | – |
| WM33 | MoS2 / graphite | WM33 (for plastic forming) | Gray-black | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | M88 / M81 |
Note: The curing-temperature column of this table is typeset vertically in the original printed catalog; please refer to the printed edition for exact curing conditions of each model.
Low friction coefficient, wear resistance, heat resistance, acid and alkali resistance, oil resistance and solvent resistance. Ratings as defined above.
| Series | Solid lubricant | Typical models | Color | Film | Thickness | Ratings | Water-based counterpart |
|---|---|---|---|---|---|---|---|
| HM1 | – | HM1-20 (wear-resistant type) | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WHM1 |
| HM2 | MoS2 / graphite | HM2-20 (low-friction thin-film type) | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WHM2 |
| HM3 | – | HM3-25 (even lower friction type) | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WHM3 |
| HM1-G8 | – | HM1-G8 (special purpose) | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WG8 |
| MPC | PTFE / MoS2 / graphite | MPC20 | – | Hard film | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WMPC |
| PC | PTFE / graphite | PC20 | – | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WPC |
| P / TP / ZP | PTFE | P20; TP20 / ZP20 (wear-resistant type of TP) | White / black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WP / WTP / WZP |
| CP | Graphite / PTFE | CP20 | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WCP |
| E260 | PTFE | E260 | Red | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WP |
| E270 | Graphite | E270 | Black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WPC |
| E510 | PTFE + MoS2 | E510 / E510F (air-drying type) | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WMPC |
| E520 | PTFE + MoS2 | E520 | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WMPC |
| E530 | MoS2 + PTFE | E530 | Gray-black | Hard film | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WMPC |
| E250 | PTFE | E250 | White | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WP |
| E670 | MoS2 | E670 | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WBM69 |
| E610 | MoS2 + graphite | E610 | Gray-black | – | 1–30 µm | ◎ / ◎ / ◎ / ◎ / – / – / △ / ◎ / ○ | WM66 |
| M80 | – | M80 | – | – | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WM80 |
| M88 | MoS2 | M88 | – | – | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WM88 |
| M81 | Graphite | M81 | Gray-black | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WM81 |
| BM58 | – | BM58 (quick-dilution dry type) | – | – | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WBM68 |
| M6 | – | M6 (60120 / 6025T and related models) | – | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WBM68 / WM66 / W61 |
| M5 | MoS2; MoS2 / graphite; graphite | M55010 / M55600 and related models | Gray-black | Medium-hard film | 1–10 µm | ◎ / ◎ / – / ◎ / △ / ○ / ◎ / △ / ◎ | WM66 / WBM68 / W61 |
| T7 | PTFE / MoS2 / graphite | T750 | Gray-black | – | 1–10 µm | ○ / ○ / – / ◎ / ◎ / ◎ / ◎ / ○ / ◎ | W61 |
| T7 | PTFE / graphite; graphite / PTFE | T720 / T730 | – | Soft film | 1–10 µm | ◎ / ◎ / – / ◎ / ◎ / ◎ / ◎ / ○ / ◎ | WBM68 / WM66 |
| T7 | PTFE | T710 | White | – | 1–10 µm | ◎ / ◎ / – / ◎ / ◎ / ◎ / ◎ / ○ / ◎ | – |
| PC50 | PTFE | PC50 / PC50-sp | White | Soft film | 1–10 µm | ○ / ○ / – / ◎ / ◎ / ◎ / ◎ / ○ / ○ | W61 series |
| PA52 | PTFE | PA52 / PA52-sp | White | Soft film | 1–10 µm | ○ / ○ / – / ◎ / ◎ / ◎ / ◎ / ○ / ○ | W61 series |
| PB53 | PTFE | PB53 / PB53-sp | White | Powder dry film | 1–100 µm | ○ / ○ / – / ◎ / ◎ / ◎ / ◎ / ○ / ○ | W61 series |
| PB54 | PTFE | PB54 / PB54-sp | Colorless, transparent | Semi-dry soft film | 1–100 µm | ○ / ○ / – / ◎ / ◎ / ◎ / ◎ / ◎ / ○ | W61 series |
| BN70 | BN | BN70 / BN70-sp | White | Soft film | 1–10 µm | ○ / ○ / – / ◎ / ○ / ◎ / ○ / ○ / ◎ | WBN70 |
| Category | Representative models | Solid lubricant | Description |
|---|---|---|---|
| Water-based (eco-friendly) | WHM1 / WHM2 / WHM3 / WG8; WMPC12 / WPC12 / WCP12 / WP12 / WTP12 / WZP12; WM66 / WBM68; W61C / W6110 / W6120 / W6130 | MoS2 / graphite; PTFE / graphite; MoS2; MoS2 / graphite; PTFE / graphite | Conventional dry film lubricants are solvent-based and contain large amounts of harmful organic solvents, which endanger operators' health and evaporate into the atmosphere as VOCs, seriously polluting the environment. Zirun's water-based dry film lubricants consist mostly of water (80–90%), produce no harmful VOCs (VOC generation is about 5% of the solvent-based type), and greatly reduce adverse effects on the environment and operators' health. |
| Low friction, wear-resistant | HM1-20 / HM2-20 / HM3-25 / G8 and water-based WHM1-12 / WHM2-10 / WHM3-12 / WG8-10; MPC20 and water-based WMPC12; PC20 / CP20 and water-based WPC12 / WCP12; P20 / TP20 / ZP20 and water-based WP12 / WTP12 / WZP12 | MoS2 / graphite; MoS2; graphite / PTFE; PTFE | (1) Hard film: lubricating, wear-resistant, long-life, permanent lubrication. (2) Mainly solid lubricants based on PTFE and MoS2 with graphite and other solid lubricants added — the most important members of the dry film lubricant family. (3) Even better when used together with lubricating oil or grease; friction coefficient can be reduced to 0.03. |
| Anti-rust, corrosion-resistant | P20 / TP20 / ZP20 and water-based WP12 / WTP12 / WZP12 | PTFE | (1) Hard film, for places requiring both rust prevention and lubrication. (2) PTFE-containing films generally have stronger rust prevention than MoS2-containing films. |
| High and low temperature | M80 / M88 / M81; HM1-20 / HM2-20 / HM3-25 / G8 and water-based WHM1-12 / WHM2-10 / WHM3-12 / WG8-10; T770 / T71C / T710 / T720 / T730 / T750 | MoS2 / graphite; MoS2 / graphite / PTFE | (1) Ordinary oils and greases are generally not used above 200 C. Solid lubricants decompose at much higher temperatures (PTFE 300 C; MoS2 350 C; graphite 550 C; BN 900 C) and can be used continuously at 250–450 C and below –100 C. (2) This series uses special additives and can be used continuously at 250–450 C and below –100 C. |
| Running-in | M80 / M88 / M81 / BM58 / BM55; M6 and M5 series; T770 / T71C / T710 / T720 / T730 / T750; water-based W61C / W6110 / W6120 / W6130; water-based WM66; water-based WBM68 | MoS2 / graphite; MoS2; MoS2 / graphite / PTFE | (1) Soft film that wears within a short time so contact surfaces achieve effective contact and running-in. (2) Mainly high-concentration MoS2-based solid lubricants. (3) For large and heavy machinery and high-pressure sliding contacts. (4) Phosphating pretreatment of the workpiece gives a synergistic effect: load resistance and long life. |
| Easy coating (dip coating) | Water-based WM66 / WBM68 / W61C; BM58 / M610 / M560 / T7 series | MoS2 / graphite; MoS2 / graphite / PTFE | Dry film lubricants are generally applied by spraying or brushing. For large quantities of small parts that cannot be sprayed easily, dip coating provides a simple film and improves work efficiency. |
| For rubber and plastics | T71C / T770 / T710 / T720 / T730 / T750; water-based W61C / W6110 / W6120 / W6130 | MoS2; graphite / PTFE | The dry film must provide elasticity (stretchability), adhesion and long service life. |
| Stamping and forming | BM68 / M80 / M88 / M81 / M610 / M560; water-based WM66 / W61C / WBM68 | MoS2 / graphite | During stamping (cold pressing), the lubricating film must follow the deformation so that the film remains present on the deformed parts. |
| Aerosol type | M88sp / M81sp / M610sp / BN70-sp; P50sp / P52sp / P53sp | MoS2 / graphite; MoS2; BN; PTFE | Made into spray form for easy use and uniform film formation; can also penetrate into the gaps of parts. |
Applications span automobiles, home appliances, machinery and industrial equipment: high-temperature bearings; aluminum extrusion dies; high-temperature anti-seize for gaskets and seals; lubrication and anti-sticking of metro door rubber seals; pharmaceutical tablet press dies; drug-resistant inner coatings of medical catheters; intake and cylinder coatings of engines; lead screws of high-speed rail and metro doors; inner rings of joint bearings; rotating mechanisms of satellite solar panels; rollers of printers and copiers.
| Product | Operating temperature | Appearance | Lubricating component | Features | Package |
|---|---|---|---|---|---|
| L5 / L10 / L15 / L20 | –30 to 250 C | White | Fluorinated oil + PTFE | Reduces friction and noise in rotating and sliding plastic and rubber parts. (1) Lubrication of sliding parts and gears in electrical and electronic equipment, office equipment, home appliances and automotive interior parts. (2) Best suited to preventing noise from engaging parts during movement. (3) Prevents wear of electrical contacts. | 0.1 kg / 0.5 kg / 1 kg |
| Product | Operating temperature | Appearance | Lubricating component | Features | Package |
|---|---|---|---|---|---|
| FG60 | –30 to 250 C | White | Fluorinated oil, PTFE | (1) Sliding parts of precision components such as injection mold ejector pins. (2) Bearings and sliding parts at high temperature (up to 250 C). (3) Bearings and sliding parts working in chemicals or solvents. (4) Bearings and sliding parts in chemical and solvent environments that ordinary oils and greases cannot handle. (5) Contains fluorinated oil: extremely resistant to oxidation and aging, with low evaporation, giving long-lasting stable lubrication (long-life lubrication). (6) Dust-free, durable lubrication of bicycle chains. | 0.1 kg / 0.5 kg / 1 kg |
| FG60-sp | –30 to 250 C | White | Fluorinated oil, PTFE | Spray version of FG60. | 330 ml |
| Product | Appearance | Lubricating component | Operating temperature | Base oil kinematic viscosity (40 C) | Type | Description | Features |
|---|---|---|---|---|---|---|---|
| FG10 | White | Fluorinated oil, PTFE | –30 to 250 C | 420 | Standard type | Wide range of applications | See features below |
| FG20 | White | Fluorinated oil, PTFE | –30 to 250 C | 420 | Rust-prevention enhanced type of FG10 | For lubrication + rust prevention | – |
| FG21 | White | Fluorinated oil, PTFE | –30 to 250 C | 420 | Rust-prevention enhanced type of FG10 | For lubrication + rust prevention | – |
| FG30 | White | Fluorinated oil, PTFE | –50 to 250 C | 130 | Low-temperature type | Usable from –50 C to 250 C | – |
| FG31 | White | Fluorinated oil, PTFE | –50 to 250 C | 22 | Low-temperature, low-viscosity type | Usable from –50 C to 250 C | – |
| FG80 | Gray-black | Fluorinated oil, PTFE | –25 to 250 C | 510 | Electrically conductive type | Bearings of anti-static printers and copiers, contacts of electromagnetic switches, etc. | – |
Features of the FG series: (1) Lubrication of plastics, resins and rubber under high and low temperatures in chemical and solvent environments that mineral-oil lubricants cannot handle. (2) Contains fluorinated oil: extremely resistant to oxidation and aging, with low evaporation, giving long-lasting stable lubrication (long-life lubrication). (3) Contains PTFE and other solid lubricants: excellent load resistance. (4) Little affected by temperature change; usable from low to high temperature. (5) The fluorinated oil has low vapor pressure, suitable for use in vacuum environments within a certain range and in clean rooms.
Also used for: microwave oven door shafts, turntable motors and fan motors.
| Product | Appearance | Lubricating component | Operating temperature | Friction coefficient (for plastics) | Features |
|---|---|---|---|---|---|
| PG10 | White | PAO oil + PTFE + MCA | –50 to 140 C | 0.08 | (1) For assembly and lubrication of plastic and resin parts in chemical and solvent environments that mineral oil cannot handle; prevents assembly adhesion burns and ensures smooth running-in. (2) Contains PTFE, organic molybdenum and MCA solid lubricants: excellent wear resistance and low friction. (3) Little affected by temperature change; usable from low to high temperature. (4) A white lubricant for clean lubrication, used in automobiles, food processing equipment, paper-making equipment and office equipment. |
| PG10-U | Light green | PAO + PTFE + MCA + organic molybdenum | –50 to 140 C | 0.05 | Low-friction version of the PG series. |
| PG20 | Light yellow | PAO + PTFE + MCA + organic molybdenum | –60 to 140 C | 0.05 | Low-temperature, low-friction version. |
| Product | Operating temperature | Appearance | Lubricating component | Features | Package |
|---|---|---|---|---|---|
| PL60 | –20 to 250 C | White | Mineral oil, PTFE | (1) Lubrication of injection molding machine ejector pins. (2) Sliding parts of office equipment. (3) Lubrication of rotating and reciprocating sliding parts of precision instruments. (4) A clean lubricant that keeps lubricated parts neat and stain-free. | 1 kg |
| PL60-sp | –20 to 250 C | White | Mineral oil, PTFE | Spray version of PL60. | 330 ml |
| Product | Operating temperature | Appearance | Solid lubricant | Consistency (NLGI worked penetration) | Compatible material | Features | Package |
|---|---|---|---|---|---|---|---|
| PG10 | < 250 C | White | PTFE / MCA | 300 | Plastics | Running-in and assembly of plastic parts | 0.5 / 1 kg |
| PG20 | < 250 C | Light yellow | PTFE / MCA, organic molybdenum | 300 | Plastics | Running-in and assembly of plastic parts (low-friction type of the above) | 0.5 / 1 kg |
| PT35 | < 350 C | Gray-black | MoS2 | 300 | Metals | High-concentration MoS2; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| PT35-sp | < 350 C | Gray-black | MoS2 | 300 | Metals | High-concentration MoS2, thin film; anti-seize and assembly of metal parts | 420 ml |
| PT36 | < 350 C | Gray-black | MoS2 / graphite | 300 | Metals | Lubrication under low speed and high load; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| PT36-sp | < 350 C | Gray-black | MoS2 / graphite | 300 | Metals | Lubrication under low speed and high load, thin film; anti-seize and assembly of metal parts | 420 ml |
| PT40 | < 400 C | Gray-black | MoS2 | 300 | Metals | Little residue at high temperature; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| GL7 | < 600 C | Black | Graphite + oil | 300 | Metals | Lubrication possible at high temperature; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| GL7-sp | < 600 C | Gray-black | Graphite + oil | 300 | Metals | Lubrication at high temperature, thin film; anti-seize and assembly of metal parts | 420 ml |
| PT80 | < 800 C | Copper gray | Graphite + oil | 300 | Metals | Rust prevention, salt resistance, moisture resistance; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| PT80B | < 800 C | Brown | MoS2 / graphite, metal powder / oil | 300 | Metals | For high-temperature operation lubrication; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| PT110 | < 1,100 C | Brown | MoS2 / graphite, metal powder / oil | 300 | Metals | Ultra-high temperature, chemical resistance; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| BN60 | < 1,200 C | White | BN / oil | 300 | Stainless steel | Anti-seize and assembly of stainless steel screws | 0.5 / 1 kg |
| BN60sp | < 1,200 C | White | BN / oil | 300 | Stainless steel | Anti-seize of stainless steel screws; assembly / thin film | 420 ml |
| WPT1201 | < 1,100 C | Gray | MoS2 / graphite, metal powder / water | 300 | Metals | Ultra-high temperature, chemical resistance; anti-seize and assembly of metal parts | 0.5 / 1 kg |
| WPT1202 | < 1,100 C | Gray | MoS2 / graphite, metal powder / water | 300 | Metals | Ultra-high temperature, chemical resistance; anti-seize and assembly of metal parts | 0.5 / 1 kg |
Note: MCA = melamine cyanurate; BN = boron nitride.
Test conditions: density at 25 C; oil separation at 100 C; evaporation at 105 C for 8 h.
| Product | NLGI grade | Appearance | Density (g/cm3) | Oil separation (wt%) | Evaporation (wt%) | Base oil | Operating temperature | Features | Application materials |
|---|---|---|---|---|---|---|---|---|---|
| MV900 | No. 1 | Gray-black | 1.17 | 1.6 | 0.5 | Mineral oil | –10 to 200 C | Contains MoS2; long-term stable torque; excellent heat resistance, sealing and gas-degradation resistance | Rotor / valve core: copper and copper alloys |
| MV800 | No. 0 | Gray-black | 1.1 | 4.1 | < 0.5 | – | – | Contains MoS2; ensures long-term torque stability; excellent heat resistance, sealing and gas-degradation resistance; minimizes adverse effects of dimensional changes over years in assemblies of different metals with different thermal expansion coefficients | Rotor / valve core: copper and copper alloys; valve body: aluminum and aluminum alloys |
| MV801 | No. 1 | Gray-black | – | 2.5 | < 0.5 | Synthetic oil | –40 to 200 C | Low-temperature version of MV800 | Same as MV800 |
| MV700 | No. 2 | Gray-black | 1.36 | 2.1 | < 0.5 | – | – | Contains MoS2, graphite and special synthetic oil; excellent adhesion and shear stability | Large industrial use |
| MV600 | No. 0 | White | 0.95 | 9 | < 0.1 | – | – | Contains PTFE and special synthetic oil; long service life | Press type |
Copper plate corrosion: 100 C / 24 h — passed.
| Category | Product | Operating temperature | Lubricating components | Features |
|---|---|---|---|---|
| Ultra-low-friction lubrication | LB81 / LB82 / LB84 | –10 to 140 C | Water-displacing agent, low-friction agent, rust preventive, lubricant | Friction coefficient as low as 0.04; salt spray test > 72 hours; lubrication, wear resistance and rust prevention |
| Water-displacing agent | LB86 | –10 to 140 C | Water-displacing agent | Temporary rust prevention; water-displacing function |
| Rust-prevention additive | LB87 / LB88 | –10 to 140 C | Water-displacing agent, rust preventive, lubricant | Lubrication, wear resistance and rust prevention; salt spray test > 72 hours |
| Long-term storage rust prevention | LB90 | –10 to 140 C | Rust preventive, lubricant | Lubrication; highly effective rust prevention |
| Mold rust-prevention oil | LB91 / LB92; LB91sp / LB92sp (spray) | –10 to 140 C | Rust preventive, water-displacing agent | Rust prevention; secondary processing possible |
SRV oscillating friction test — National Tribology Laboratory, Tsinghua University. Conditions: 50 Hz / 1.5 mm amplitude / load 180 N / 80 C / 20 min.
| Series | Model | Zn content | Features |
|---|---|---|---|
| Water-based cold galvanizing | WZ32 | 32% | Uses flake zinc powder instead of spherical zinc, greatly improving rust prevention (flake zinc powder has 2–3 times the corrosion resistance of spherical zinc). Can replace solvent-based cold galvanizing with Zn 96%. Being water-based and environmentally friendly, it reduces operators' organic solvent poisoning and VOC emissions. |
| Solvent-based cold galvanizing | ZR-Zn96 | 96% | Strongest corrosion resistance |
| Solvent-based cold galvanizing | ZR-Zn92 | 92% | Moderate corrosion resistance with a bright, sparkling color |
| Solvent-based cold galvanizing | ZR-Zn84 | 84% | Moderate corrosion resistance, bright white color, good cost performance |
| Category | Products | Main agent | Color | Film | Features and uses |
|---|---|---|---|---|---|
| MoS2 dry film; MoS2 / graphite dry film | M520sp / M610sp / M80sp / M88sp / BN58sp | MoS2; MoS2 / graphite | Gray-black | Soft film | Low friction; running-in; assembly use. Lubrication of contact parts from low to high temperature and low to medium speed under high load; assembly lubricant for machine parts (high vacuum, low or high temperature); running-in lubricant (cylinder bolts, high-voltage switches, oven guide rails, car mirror mechanisms, trial running of high-load bearings and large gears/pulleys); anti-seize lubricant for bolts; release agent for plastic forming; lubricant for extending cutting tool life. Note: M88 has better wear resistance than M80. Heat resistance up to 450 C (M80sp / M88sp). Quick-drying thin film types available. |
| PTFE / MoS2 / graphite dry film | M601sp / M508sp | PTFE; MoS2 / graphite | Gray-black | Hard film / soft film | For durable lubrication and oil-free lubrication; low friction coefficient; running-in |
| PTFE lubricating dry film series | PC50-sp / PA52-sp / PB53-sp / PB54-sp / FL60-sp / PG60-sp | PTFE; fluorinated oil / PTFE / fluorinated solvent | White / colorless | Soft film; powder dry film; semi-dry film | High-precision release agent for plastics and rubber; low-load lubrication and anti-adhesion; low friction and anti-sticking for plastics and rubber; powder PTFE for moving heavy objects; contains organic molybdenum, penetrating and long-lasting, for precision equipment; good adhesion and durable lubrication; quick-drying film. Uses: light-load lubricating parts of textile machinery, food machinery, printing machinery, woodworking machinery, automobiles, furniture, printers, copiers, fax machines and cameras; friction reduction and non-stick treatment of moving parts under light load; lubrication of support points and contact surfaces when moving heavy machinery, bridges and metro tunnel machines; lubrication of injection molding machine ejector pins and sliding parts of office equipment; lubrication of rotating and reciprocating parts of precision instruments; sliding parts of precision components such as injection mold ejector pins; dust-free durable lubrication of bicycle chains. |
| BN lubricating dry film; high-temperature anti-seize sprays | BN70-sp / BN60-sp / GL7-sp / PT35sp / PT36sp | BN; graphite; MoS2; MoS2 / graphite | White / black / gray-black | Soft film / semi-dry film | Heat resistance: BN70-sp 900 C; BN60-sp up to 1,200 C; GL7-sp up to 600 C; PT35sp up to 350 C; PT36sp up to 350 C with enhanced rust prevention. Uses: release agent for aluminum alloy processing and aluminum extrusion; lubricant for high-temperature chain conveyors, roller conveyors and high-temperature furnaces in steel and glass plants; prevention of seizure of bolts, bearings and pins; release agent for diamond tool forming; anti-seize and anti-galling lubrication for screws and ejector pins and during assembly of large equipment. |
| Category | Products | Main agents | Color | Film | Features and uses |
|---|---|---|---|---|---|
| Lubricating anti-rust water-displacement series | MB87 / MB88 / MB86 | Rust preventive, lubricant, water-displacing agent | Light yellow / blue | Oil film / semi-dry film | MB87: enhanced lubrication and wear resistance with rust prevention (all-round lubricant and rust preventive). MB88: enhanced lubrication and wear resistance, water displacement and rust prevention (all-round lubricant, water-displacing and rust preventive). MB86: enhanced water displacement; quick and temporary rust prevention. For parts needing long-lasting lubrication (rotating dining tables, door and window hinges, bicycle chains). |
| Ultra-low friction | L84 | Low-friction agent, etc. | Colorless | Semi-dry film | Friction coefficient as low as 0.04 |
| Long-acting rust prevention | LB87 / LB88 | Rust preventive, lubricant | Blue / colorless | Soft film | Enhanced rust prevention with lubrication; enhanced rust prevention and water displacement with lubrication; for parts focusing on rust prevention and on rust prevention with water displacement; long-term stock rust prevention of factory products |
| Temporary mold rust prevention | MB92sp (colored) / MB92sp; MB91sp (colored) / MB91sp | Rust preventive, water-displacing agent | Colorless / red | Oil film | MB92 series: long-term rust prevention, salt spray test over 72 hours. MB91 series: short-term rust prevention with water displacement; MB91sp (colored) is the high-temperature type. For temporary mold rust prevention, rust prevention of electrical and automotive small parts, moisture removal and revival of electrical contacts, rolled and formed materials, and forgings. |
| Flaw detection sprays | S01 cleaning solution / S02 penetrant / S03 developer | Penetrating dye, etc. | White / dark gray / gray-white | Hard film | Quick development, easy to use; for surface damage and crack inspection of ceramic products and similar parts |
| Cold galvanizing coating sprays | ZR-Zn96-sp / ZR-Zn92-sp / ZR-Zn84-sp | Zn | White / gray | – | ZR-Zn96-sp: high-concentration zinc powder. ZR-Zn92-sp: flake zinc powder, gray-white surface. ZR-Zn84-sp: medium-concentration zinc powder, good cost performance. Anti-corrosion uses: ships, bridges, generator towers, viaducts, pedestrian bridges; corrosion repair of hot-dip galvanized components and welded parts. |
Guangzhou Zirun New Material Technology Co., Ltd.
This catalog in other languages: Español · Português · Русский · العربية
Photos from the manufacturer's catalog.
